The VVS2 diamond is already in the category of elite diamonds. All VVS2 clarity diamonds are spectacular. And yes, they may be more included than the VVS1 diamond, but those differences are not something that will ever be discernable to the human eye.
In fact, it will even be challenging for expert graders to find these inclusions at 10x magnification.
However, these are a few things you should know about the VVS2 rating and the devil is in the detail.
- VVS2 Clarity – Basic Characteristics
- VVS2 Inclusion Properties
- What About the Cut?
- What Are the Prices of VVS2 Diamonds?
- Is There a Way to Save on VVS2 Diamonds?
- Top 3 VVS2 Diamond Rings
- In Pursuit of Clarity
- Talk to a Diamond Expert
VVS2 Clarity – Basic Characteristics
VVS2 (or Very Very Slightly Included 2) is the lower-tier grading in the VVS category. This signifies that the properties of the inclusions are different than VVS1, IF, or FL diamonds.
Flawless or FL diamonds don’t have any inclusions or blemishes when observed under 10x magnification. This is how an expert grader would find the diamond, and you should get the same result if you’re to look at the diamond yourself. IF diamonds, on the other hand, don’t have any inclusions at all save for some small blemishes.
These minuscule imperfections on the surface of the stone won’t affect the overall characteristics of the diamond. On top of that, they’ll remain invisible to the naked eye no matter how hard you try to change the viewing angle and light.
However, if you’re to compare a VVS1 and a VVS2 diamond, it might prove hard for any layman to figure out the difference in the grading. The fact is it’d be hard for you to tell them apart even if you were to inspect the stones under a microscope.
And then there’s the diamond’s readiness to be graded. As you’re looking for a needle in a haystack, minute dust particles may lead you astray if you forgot to wipe down the diamond and all. That said, dust particles would appear more like blemishes than inclusions.
Let’s have a closer look at the properties of the inclusions found in VVS2 stones.
VVS2 Inclusion Properties
The thing is that some inclusions are almost unavoidable. It takes nature one to three billion years and with intense levels of heat and pressure to convert carbon-containing organic matters into diamonds. It’s simply unreasonable for anyone to expect this to happen with perfection through all the years unless we’re talking about a lab-made diamond.
So, we’ve established that VVS2 inclusions are few and far between, but how do they compare to those found in VVS1 diamonds.
For both of the grades, the common inclusions come in the form of pinpoints, feathers, or needles. If the stone is cloudy or grainy at all, you’re not looking at a VVS2 or VVS1 diamond.
As to the difference between the two grades, VVS2 being the lower grade means that diamonds of this rating may have a greater number of inclusions. Either that or they could be located near the stone’s plateau.
For instance, you might stumble upon a VVS1 diamond that has five or more pinpoint inclusions. But as long as these inclusions don’t cluster together to form a cloud, they’re like as not invisible to the naked eye.
In contrast, a VVS2 diamond could have a couple of feather inclusions with pronounced reflectivity. As such, these inclusions would be easier to spot, hence the lower rating.
Certain inclusions may have an odd color in that feather may appear white and some crystal pinpoints are dark. This will affect the grading but not the overall color of the diamond. Quite the contrary, the lower color grade might actually mask the inclusion-imposed color.
Once again, this applies only to VVS2 diamonds. VVS1 diamonds must have fewer colorless inclusions that have low to no reflectivity.
What About the Cut?
Most experts would agree that the cut is the king. In other words, the cut accentuates a stone’s natural brilliance and color while hiding some of the inclusions. That said, you have more options in the cut of VVS2 diamonds.
For instance, it may not be recommended to go for an Asscher cut of a VS1 diamond due to the cut’s number of parallel facets, you can totally go with an Asscher cut VVS2 diamond as long as the inclusions aren’t near the plateau.
That’s why the number and type of inclusions actually determine the appropriate cut. Whenever possible, a jeweler may attempt to mask the inclusions’ reflection or incorporate them into the flow of the diamonds.
All in all, it’s within the realm of possibility to select a bold cut on a VVS2 diamond. It will still appear eye-clean and it’s not likely that the inclusions are going to show up under different lighting and viewing angles.
What Are the Prices of VVS2 Diamonds?
First and foremost, diamond prices aren’t based on clarity alone. The carat and the color are the other major contributors, and then there’s the cut. Altogether they make up the 4Cs of diamonds.
Sure, a bigger diamond is likely to be more expensive. And the same goes for a colorless diamond (D color on the GIA scale) In terms of the cut, the complexity and the craftsmanship contribute to the final price. But then, some cuts can also be more expensive for their popularity or high demand.
A rough estimate for a 1-carat VVS2 diamond of D color would be between $8,000 and $11,000. E and F diamonds of the same weight would be about $500 to $2,000 less. And so forth.
However, the price doesn’t grow up proportionally with the size but more like exponentially. Compared to the 1-carat stone above, a 2-carat of the same would command $35,000 to $55,000.
Now, let’s come back to earth and find out a sensible number for a VVS2 diamond engagement ring. The best estimate is that you should be able to get a great VVS2 ring for $10,000, give or take. This includes the setting, cut, auxiliary gemstones, and all that good stuff, with a 1.00-carat center stone.
Is There a Way to Save on VVS2 Diamonds?
Yes, there is, but not so much shopping around. To spend less on a diamond usually means that you’ll have to settle for a smaller or lower quality diamond.
A lower color grade, for example, can make a difference of a few hundred dollars, if not thousands. This means you may have to settle for a yellowish reflection, and you can be the judge about whether it’s worth it.
Carats that fall between 0.50 and 0.75 are usually less expensive. That’s generally true of all non-standard sizes (0.90 carats, for example).
Lastly, you can make plans to shop during the off-season. This means you should avoid buying diamonds around important dates and in springtime. Just be mindful that the off-season for one area of the country may not be the same for the next.
Shop for VVS2 Clarity Diamond Engagement Rings
Browse through some of the the diamond rings in our collection that all have a certificate that confirm their status as VVS2 Clarity. See below to view our entire VVS2 clarity diamond collection.
Rockford RingContact Us For Price
Bulgari Platinum and Diamond Ring. Circa 1970$45,000
Sea Cliff RingContact Us For Price
Top 3 VVS2 Diamond Rings – Estate Diamond Jewelry Collection
A GIA-certified 1.05-carat diamond takes center stage on the Redmond ring. The color is F and the clarity VVS2. The ring’s shoulders have two more baguette-cut diamonds on each side, of which the ones closer to the shank are tapered.
This is a handcrafted piece of all platinum build. Due to the cut, the center stone appears larger than and the additional diamonds complement its brilliance.
Overall, the Redmond offers clean lines and timeless aesthetics that can fit any style. Plus, it’s quite a bargain too at its specs.
This ring is part of our ring collection of vintage engagements.
Need an eye-catching engagement ring? The New York might be just what you’re looking for. From the GIA-certified, Asscher cut 1.01-carat diamond to the intricate open-work filigree in the under-gallery, this ring seems to have it all.
There is also a halo of auxiliary gemstones that follows the square shape of the center stone. The ring’s shoulders have a floral motif with fine milgrain, which is also present on the bezels.
The triple-wire shank rounds off the design, creating a vintage-style piece that’s almost certain to put a smile on the bride-to-be’s face.
If money is no object, how about this Tiffany piece armed with a hefty 5.14-carat diamond of G color and VVS2 clarity. The center stone is emerald cut and a GIA certificate is included.
Furthermore, you’re also getting two trapezoid diamonds or one on each flank. These gems weigh about 0.80 carats total and are of VS clarity and G-H color. The platinum ring is part of Tiffany & Co.’s signed collection of engagement rings.
Finally, this is a rare piece and a great addition to your jewelry collection.
In Pursuit of VVS2 Clarity
Can a VVS2 diamond be a good buy? Of course, it can definitely be the case. More importantly, VVS2 diamonds are eye-clean and may appear more valuable than their prices to the untrained eye.
The trick to getting any diamond, much less a VVS2 diamond, is to arrive at a middle ground for all of the 4Cs, guided by your budget of course. There’s a lot of room to pull down the color rating and still bag an impressive stone.
Talk to a Diamond Expert
Do you have any additional diamond-related questions? Feel free to send a message to our diamond experts. They will respond within 1 business hour.